Tools

SPC Performance 2022 Edition Spec Book - 82022

A must for every alignment tech, this spec book lists all major alignment angles for all vehicles from 2013-2023. Front caster, camber and toe, rear camber and toe, along with SAI and turning angle are presented in an easy to read format. Also included...

SPC Performance VALVE STEM PULLER - 40270

This easy to use valve stem puller protects the wheel and rim while you get the job done quickly. Simply screw the pivoting head onto the valve stem, slide the hard rubber protecting block to the edge of the wheel rim, and remove the stem without rim...

SPC Performance UNIVERSAL TIE ROD TOOL - 40900

This economical tool fits most cars & light trucks with split tie rod sleeves. Double-end feature makes 360 degree turns possible. California Residents WARNING

SPC Performance XAXIS Remove/Install Adapter - 29606

Using a shop press, the tool is designed for quick, easy removal & installation of xAxis sealed flex joints with 40mm OD and up to 60mm wide; including part numbers 15623, 15625, 15627, 15629, 15631, 15633, 15635, 15637, 15639, and 15643. California...

Ford Racing Off-Road Recovery Board - Pair - M-1820-FPRB

These recovery boards offer a simple, yet effective, recovery solution. These boards offer an aggressive pattern with deep cleats for the maximum grip. Manufactured by ActionTrax in the USA, these boards are made from a specialty designed polymer to...

SPC Performance CARBIDE INSERTS-HUNTER - 06506

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

Fox Spanner Wrench (3.0 Backup) - 803-00-735

Fox Spanner Wrench (3.0 Backup)

SPC Performance (WA374) TOE GAUGE - 99374

Extends 39-60" for standard & compact cars. Spring loaded gauge easily adapts to a variey of tread widths in order to give fast, accurate toe readings. California Residents WARNING

SPC Performance UNIV SPRING COMPRESSOR - 40260

This two-piece internally threaded spring compressor is a great option for MacPherson Strut, coilover, and other sccessible springs. With 1-11" of travel and a 2645 lbf (1200kg) max qoekinf load with a 3X safety factor, this is an ideal tool for almost...

SPC Performance WHEEL CENTERING - 32115

Stop wheel hop and vibrations on hub piloted wheels! Hub pilot hole diameter tolerances can allow wheels to be installed and tightened in an "off-center" or clocked position. The 32115 is for Ford F450/550 Super Duty. These tools slide directly over...

SPC Performance HD WHEEL CENTERING - 32111

Stop wheel hop and vibrations on hub piloted wheels! Hub pilot hole diameter tolerances can allow wheels to be installed and tightened in an "off center" or clocked position. The 32111 threadless wheel centering tool set (3) fits 22mm studs on Heavy Duty...

King Shocks 2.0in & 2.5in Coil Nut Tool T-Handle Assembly - 25308-100

King Shocks 2.0in & 2.5in Coil Nut Tool T-Handle Assembly

Fox Spanner Wrench (2.5 Preload) - 803-00-732

Fox Spanner Wrench (2.5 Preload)

LIQUI MOLY Drain Spout w/O-Ring - DIN 61 - 7924

Use with 20 liter containers to dispense fluid into smaller container. Ideally used when 20 liter container is used with Liqui Moly oil cabinet.

LIQUI MOLY AC System Cleaner Gun - 4090

Aspecial tool for the application of the LIQUI MOLY A/C System Cleaning Fluid (part no. 20001). Produces a circular spray pattern to allow proper cleaning of evaporator. The reservoir uses a quick connector for easy hook-up and handling during...