Additives

LIQUI MOLY 500mL Truck Series Complete Fuel System Cleaner - 20250

Aneffective mixture of additives to clean and maintain the fuel system of port injected and carburetedgasoline engines. Cleans injectors, the combustion chamber and protects against corrosion. Restores proper fuel atomization and improves engine...

LIQUI MOLY DIJectron Additive - Gasoline Direct Injection (GDI) Cleaner - 22076

The unique combination of proven PEA technology and the latest additive generation achieves maximum cleaning performance in the combustion chamber, in and around the injector tip and in the entire fuel system. Furthermore, DIJectron stops the formation...

LIQUI MOLY Pro-Line Turbocharger Additive - 22074

Provides initial lubrication of new or replaced turbochargers to prevent damage due to oil starvation. Damage to turbocharger may occur within seconds of engine start if not lubricated properly. Pro-Line Turbocharger additive will provide needed...

LIQUI MOLY 300mL Radiator Cleaner - 2051

Add contents to the cooling water. Turn the heating to maximum and let the engine run on idle for 10 - 30 minutes depending on the degree of contamination. Drain the coolant and flush the cooling system with water. Fill the cooling system according to...

LIQUI MOLY 500mL Pro-Line Engine Flush - 2037

One 500 ml can is sufficient for up to 5 liters(1.3 gal.) of oil. Add Pro-Line Engine Flush to the engine oil at operating temperature before changing the oil. After adding the product allow the engine to idle for 10 to 15 minutes depending on the degree...

LIQUI MOLY 500mL Pro-Line Fuel Injection Cleaner - 2030

To be added directly into the fuel tank. As a preventive measure, add during each inspection, after repairs on the fuel system and after each Jet-Clean cleaning operation. The product mixes with the fuel automatically. Minimum fuel filling of 25 liters...

LIQUI MOLY 500mL Truck Series Oil Treatment - 20256

Ensures immediate friction and wear reduction, adds an extremely protective and pressure-resistant boundary layer with low friction and lubricates during cold starts to prevent damage from lack of oil. Contributes to lower fuel consumption, longer engine...

LIQUI MOLY 500mL Truck Series Complete Diesel System Cleaner - 20252

To be added directly into the fuel tank. Use aspreventive or to cure acute engine problems. The product mixes with the fuel automatically. Minimum fuel filling of 25 liters (7 gal.) is requested for optimum product performance. Contents of Can sufficient...

LIQUI MOLY 250mL Speed Tec Gasoline - 20234

High-tech fuel additive, developed specifically for improved throttle response under partial engine load. Optimizes fuel atomization and combustion, cleans fuel system while providing maximum engine performance and efficiency.

LIQUI MOLY 400mL Pro-Line Diesel Intake System Cleaner (Aerosol) - 20208

To prepare, attach tube with nozzle. To gain access, remove hose or pipe immediately before throttle housing. The engine needs to run to perform cleaning. If unable to start engine, disconnect air mass sensor connector while the ignition switch is in off...

LIQUI MOLY 300mL MoS2 Anti-Friction Engine Treatment - 2009

MoS2 Anti-Friction Engine Treatment ensures immediate friction and wear reduction, adds an extremely protective and pressure-resistant boundary layer with low friction and lubricates during cold starts to prevent damage from lack of oil. Contributes to...

LIQUI MOLY 300mL Jectron Fuel Injection Cleaner - 2007

One 300 ml can is sufficient for up to 75 liters (20 gal.) of fuel. Regular use keeps injection system in perfect working order and gives lowest exhaust emissions. Smoother idling, better throttle response. Injection Cleaner can be mixed with fuel at any...

LIQUI MOLY 300mL Super Diesel Additive - 2002

A combination of additives to clean and maintain the diesel fuel system. Prevents corrosion, increases lubrication thus reduces fuel pump and injector wear. Increases Cetane value for improved engine performance, easier starting and lower emissions...

LIQUI MOLY 150mL Valve Clean - 2001

For all gasoline engines. Suitable for standard and high-octane gas, leaded and unleaded. 150 ml is sufficient for up to 75 liters (20 gal.)of fuel.Minimum fuel filling of 25 liters (7 gal.) is requested for optimum product performance.

LIQUI MOLY 300mL Hydraulic Lifter Additive - 20004

One 300 ml can of Liqui Moly hydraulic tappet additive is sufficient for up to 6 liters (1.5 gal.) motor oil. The product can be added at any time. After adding, run the engine until warm. For a lasting effect, Liqui Moly Hydraulic tappet additive must...