Additives

LIQUI MOLY DIJectron Additive - Gasoline Direct Injection (GDI) Cleaner - 22076

The unique combination of proven PEA technology and the latest additive generation achieves maximum cleaning performance in the combustion chamber, in and around the injector tip and in the entire fuel system. Furthermore, DIJectron stops the formation...

Motul 300ml Radiator Clean Additive - 109544

Before each coolant drain, add MOTUL RADIATOR CLEAN to the cooling system before exchanging the coolant. Move all heater controls to hot position. Let the engine idle for approx. 30 minutes. Drain the system completely and flush with clean water. Refill...

Motul 300ml Valve and Injector Clean Additive - 109614

TYPE OF USE: For Gasoline engines only. Add one can (300 ml) of MOTUL VALVE AND INJECTOR CLEAN every 6 months to the fuel tank before refueling. Sufficient for 16gal of gasoline. For larger tank capacities add 1% of the overall filling content...

Motul 300ml Engine Clean Auto Additive - 109541

Before each oil drain, add in the engine a can of ENGINE CLEAN to hot used oil. Let the engine run at idle for 15 minutes. Drain the oil and change the oil filter. The content of one can is sufficient for an oil capacity up to 5 liters. For higher...

LIQUI MOLY Pro-Line Turbocharger Additive - 22074

Provides initial lubrication of new or replaced turbochargers to prevent damage due to oil starvation. Damage to turbocharger may occur within seconds of engine start if not lubricated properly. Pro-Line Turbocharger additive will provide needed...

LIQUI MOLY 300mL Radiator Cleaner - 2051

Add contents to the cooling water. Turn the heating to maximum and let the engine run on idle for 10 - 30 minutes depending on the degree of contamination. Drain the coolant and flush the cooling system with water. Fill the cooling system according to...

LIQUI MOLY 500mL Pro-Line Engine Flush - 2037

One 500 ml can is sufficient for up to 5 liters(1.3 gal.) of oil. Add Pro-Line Engine Flush to the engine oil at operating temperature before changing the oil. After adding the product allow the engine to idle for 10 to 15 minutes depending on the degree...

LIQUI MOLY 500mL Pro-Line Diesel Cleaner - 2032

To be added directly into the fuel tank. As a preventive measure, add during each inspection, after repairs on the fuel system and after each Jet-Clean cleaning operation. The product mixes with the fuel automatically. Minimum fuel filling of 25 liters...

LIQUI MOLY 500mL Pro-Line JetClean Gasoline System Cleaner Concentrate - 20312

Mix the contents of the can (500ml) with 4.5l high-quality, premium-grade fuel in a clean canister. Fill the finished mixture of cleaning agents in the tank of the respective JetClean device. A detailed application description is given in the...

LIQUI MOLY 500mL Pro-Line Fuel Injection Cleaner - 2030

To be added directly into the fuel tank. As a preventive measure, add during each inspection, after repairs on the fuel system and after each Jet-Clean cleaning operation. The product mixes with the fuel automatically. Minimum fuel filling of 25 liters...

LIQUI MOLY 250mL Hybrid Additive - 20288

A combination of agents, developed specifically for late model hybrid engines. Removes deposits in the fuel system and protects against corrosion. Stabilizes the fuel and protects against aging and oxidation. Diminished fuel degradation allows better...

LIQUI MOLY 500mL Truck Series DPF Protector - 20258

For best results and long-term effect add DPF protector every 2.000 km (1.200 miles). One 500 ml can is sufficient for 115 liters (30 gal.) of Diesel. Minimum fuel filling of50 liters (14 gal.) is requested for optimum product performance.