Alignment Kits

SPC Performance AL SHIMS 4X6.5X2 deg.(6) - 10732

These economical over-the-road heavy duty truck axle shims a re our lowest cost option. With average compression strength and hardness these shims are available in a large variety o f sizes and offer the technician a cost effective means to c orrect...

SPC Performance HENDRICKSON HD SHIMS 2X5 - 36087

This shim kit will adjust the thrust angle on Hendrickson's walking beam? rear tandem axle suspension. Improve tire wear and handling by adjusting thrust angle from 0" to 3/8" in precise 1/32" increments. California Residents WARNING

SPC Performance FRTLNR SHIM 1/8in. (6) - 35062

These universal shims are designed to be installed on a variety of applications. Use these at the ends of torque rods to change toe or thrust angles on Freightliner, Hendrickson, and Navistar heavy duty tandem trucks and trailers. You can also use...

SPC Performance Jeep 07-15 Wrangler / 99-04 Grand Cherokee +1 Degree Camber & Caliper Shim Kit - 26014

Make camber changes in +.5deg or +1.0deg on many popular models by installing this shim between the hub and steering knuckle. A caliper shim is also included. These durable high-strength nylon shims provide a faster option for correcting negative camber...

SPC Performance H-D TRUCK SHIM SET - 36000

These alignment shims are now available in a heavy-duty metal box to help you organize all of your shims. Packaged with a large variety of shims (listed below) and an organization chart inside the lid to make reordereing and organization of shims quick...

SPC Performance FRTLNR SHIM 1/16in.(6) - 35061

These universal shims are designed to be installed on a variety of applications. Use these at the ends of torque rods to change toe or thrust angles on Freightliner, Hendrickson and Navistar heavy duty tandem trucks and trailers. You can also use these...

SPC Performance FRTLNR SHIM 1/32in.(6) - 35060

These universal shims are designed to be installed on a variety of applications. Use these at the ends of torque rods to change toe or thrust angles on Freightliner, Hendrickson and Navistar heavy duty tandem trucks and trailers. You can also use these...

SPC Performance TANDEM SHIM-IHC 1/8 (6) - 35042

These I.H.C./Navistar Torque Arm Shims will change thrust angle and toe when installed between the torque arm and the spring hanger. On Navistar they will also center the axle with the frame rails when used on the lateral link. Six shims per box...

SPC Performance TANDEM SHIM-IHC 1/16 (6) - 35041

These I.H.C./Navistar Torque Arm Shims will change thrust angle and toe when installed between the torque arm and the spring hanger. On Navistar they will also center the axle with the frame rails when used on the lateral link. Six shims per box...

SPC Performance TANDEM SHIM-IHC 1/32 (6) - 35040

These I.H.C./Navistar Torque Arm Shims will change thrust angle and toe when installed between the torque arm and the spring hanger. On Navistar they will also center the axle with the frame rails when used on the lateral link. Six shims per box...

SPC Performance Jeep 07-15 Wrangler / 99-04 Grand Cherokee +.5 Degree Camber & Caliper Shim Kit - 26012

Make camber changes in +.5deg or +1.0deg on many popular models by installing this shim between the hub and steering knuckle. A caliper shim is also included. These durable high-strength nylon shims provide a faster option for correcting negative camber...

SPC Performance Tandem Shim-FRTLNR 1/8in (100) - 35065

These universal shims are designed to be installed on a variety of applications. Use these at the ends of torque rods to change to or thrust angles on Freightliner, Hendrickson and Navistar heavy duty tandem trucks and trailers. You can also use these on...

SPC Performance 11-17 Dodge Challenger RWD Cam Bolt Kit - 66038

Add permanent adjustability to the front end of the rear wheel drive Dodge Charger, Challenger, and Chrysler 300 vehicles with this cam bolt kit. The kit includes one camber cam and one caster cam to add adjustment to one side of the vehicle and gives...