Blue Dodge Challenger Scat Pack with a Magnuson 2650 supercharger, hood up and strapped to the Satera Tuning Dynojet

Mopar

Blower or Turbo? Real Boost Answers for Your HEMI

Satera Tuning 6 min read

We spent two hours of last Friday's live answering boost questions about superchargers, twin turbos, pulleys and fuel. Here's what we told people, backed by an 895 whp blower Scat Pack and a 1,524 whp twin-turbo TRX.

Every Friday the questions come in, and most of them come back to boost. Last Friday's live ran more than two hours, a record for us, and it was our first try at streaming to Instagram, Facebook and YouTube at the same time. 2Lo opened it with a walk through the shop in Marengo. Then the crew sat down, and one question kept coming back in different forms: should I add a blower or go turbo, and how far can I push it?

There's no one answer, and Jeremy said so more than once. "It depends on the goals" might be the most-repeated line in the stream. But the details behind that answer are worth having before you spend a dime, so here's what we told people, plus two builds from our own channel that show where each path can go.

Bolt-On Blowers Beat Hacked-On Hellcat Blowers

One of the first questions was a common one: can I put a Hellcat supercharger on my 6.4 Scat Pack? We've done it. We just don't recommend it. 2Lo's answer was about the long term. If a kit made for your car needs an idler in ten years, you call the company and get one. Some of the companies that made Hellcat blower adapter kits have already gone out of business, so those parts aren't available anymore.

Jeremy laid out what the swap actually takes. The 392 heads don't have the bolt pattern for the Hellcat blower, so you need adapters. The belt alignment is off, so you add pulleys and idlers. Then you're piecing together a coolant pump, a heat exchanger and hoses, which a kit built for the car already includes. "We often just end up seeing the cost of the install be the same, if not more," 2Lo added.

Our proof is a blue Challenger Scat Pack with an HHP/BES 426 and a Magnuson TVS2650 kit built for the 5.7 and 6.4. It bolts on, it has a strong intercooler setup, and Jeremy tuned it in house with HP Tuners.

  • 895Wheel horsepower
  • 812Wheel torque (lb-ft)
  • 13 psiPeak boost on E85
Satera Tuning Dynojet graph for a Magnuson 2650 Challenger Scat Pack showing 895.72 max power and 812.62 max torque
895.72 whp, 812.62 lb-ft and 13.13 psi peak MAP on our Dynojet. From our Magnuson 2650 Scat Pack video.

Roll Racing? Think Centrifugal

Asked whether a Whipple or a ProCharger is better for roll racing on a 392, 2Lo's first answer was "go turbo." Between those two, though, Jeremy picked the centrifugal. A positive-displacement blower like the Whipple hits hard down low, which is great off a dig. A ProCharger builds boost in a linear way, which helps traction and keeps pulling as rpm climbs. ProChargers also mostly use an air-to-air intercooler, which cools better the faster you go. The top-mounted Whipple heat exchangers sit right in the heat on long pulls.

That logic applies beyond the 392. It's part of why our S650 Mustang shop car got a Vortech first. Jeremy said it ran 60-130 in about six seconds on pump gas on the stock tires, and it only broke loose once it was on an E30 blend making about 780 wheel.

When Turbos Pull Ahead

A 2011 Challenger owner with a BGE swap asked whether trading his Edelbrock for turbos was worth it. Jeremy thinks so. At the same boost level, he'd expect about 100 to 120 more horsepower, because a turbo doesn't steal power from the crank to make boost. The 2650 is an outstanding blower, but it hits a wall fast. Turbos give you room to grow.

Turbos will always make more horsepower than a blower at the same boost level.

Jeremy Satera

How much room? On a properly built 426 with twin 64/66 turbos and pump gas, Jeremy put the realistic number in the mid to high 900s. His own twin-turbo shop car made 980 wheel at 9.5:1 compression, and he'd keep a pump-gas build at 10:1 or less. He's never seen 1,000 wheel on pump gas on his dyno, and he won't lean on a car just to get a number. On E85, that same kind of setup can make 1,500.

Here's what 1,500 looks like: a Ram TRX with our SaT.Tun 170 1200HP+ SUV/Truck package, the 170XXX build in the video. It runs Hellion twin 64mm turbos, an HHP/BES 426 long block, a Billet Evolution intake manifold, a Sipple max-effort HP95, a Fore triple-pump fuel system, ID1750x injectors and an IC Chiller.

Billet Evolution intake manifold and Kong throttle body in the engine bay of a twin-turbo Ram TRX
Billet Evolution intake manifold on the 1,524 whp TRX. From our twin-turbo TRX video.
White twin-turbo Ram TRX with the hood up on the Satera Tuning Dynojet
On the Dynojet with 31.5+ psi of boost. From our twin-turbo TRX video.
Dynojet graph for a twin-turbo Ram TRX showing 1524.54 max power and 1529.75 max torque
1,524 whp and 1,529 lb-ft through 35-inch mud tires. From our twin-turbo TRX video.

On Hellion quality, our view is simple: we install Hellion kits all the time. A mail-order turbo kit has to fit cars with different mileage, motor mounts and accident history. Exhaust leaks are the number one headache with any turbo kit. Hellion stands behind its product, and if you're fighting an install, call us.

Max-Effort Blowers: Belts, Bricks and Pulleys

Someone asked about running a 2.55 upper on a stock lower. Jeremy's answer: it's all about rotor speed, and that tiny pulley leaves so little belt wrap that it slips every shift. A 10% overdrive lower gets you the same rotor speed with a bigger upper and more grip. He wouldn't spin an unported blower that hard. Ported, it's above 950 wheel on the dyno. Unported, it's just over 900, and it won't last.

The Kong 2650 got the same treatment. We've seen belt slip with a small upper, so an idler is strongly recommended. On our dyno we've made 1,200 wheel with that combo. Around 1,150 to 1,200 wheel, Jeremy has watched the factory Hellcat intercooler bricks become the restriction. Boost before the cooler keeps climbing, boost after it stalls and intake temps rise. An IC Chiller helps.

Jeremy Satera and 2Lo answering viewer questions at the desk during the Satera Tuning live vlog in Marengo, IL
2Lo reads the next boost question to Jeremy (right). From our Nov 13 live.

Fuel, compression and the factory engine

  • Fuel first. Early on, a booster pump on a single-pump Hellcat got to about 850 wheel, but it wore out the pump. With E85, go straight to a drop-in dual-pump system like the HHP Racing plug-and-play kit.
  • Add boost, not compression. A boosted 392 owner asked about going to 13:1. Jeremy wouldn't on a street car. Detonation at that compression hits much harder. "I'd rather add a pound of boost."
  • The 900 line. Demon and Redeye engines are only slightly stronger than a standard Hellcat. Jeremy calls them pretty reliable up to about 900 wheel, and reliability drops from there. He's owned six Hellcats, a Durango Hellcat and three TRXs. His Charger Redeye shot a rod at the track at about 1,000 to 1,050 wheel.
  • 5.7 owners. The 5.7 takes boost better than the 392, and a 150 horsepower gain isn't a problem. On a 5.7, Jeremy would boost it rather than build it NA.
  • Cats at big power. Above about 900 wheel, Jeremy only trusts the Kooks high-output green cats. Rex's (@allmotahrex) NA car came in down 50 horsepower because its high-flow cats had melted inside.

Bring Us Your Goal

Shop floor at Satera Tuning in Marengo, IL with a white SUV and a red Dodge Charger on lifts and the tuning station on the left
Lifts full in Marengo. From 2Lo's shop walk on our Nov 13 live.

Blower or turbo, the right recipe starts with what you want the car to do: street, roll racing, the drag strip or chasing a number. That's what our Level 5 HEMI package is for on the 5.7, 6.1 and 6.4. Pick your power adder from Vortech, ProCharger, Whipple, Magnuson or Hellion, and we handle the fuel system, install and tune. Hellcat owners can look at our Hellcat-Powered Level 3 for a max-effort blower, or the Level XXX twin-turbo package.

Black Friday runs through Dec 15: 5% to 20%+ off our packages, and code BLACKFRIDAY26 takes 5% off packages. Jeremy promised on the live that this week would be about boost, and it is: an extra 10% off any boost or power adder package. Contact us for details.

Call 331.444.4570, email sales@sateratuning.com, or start a work request at sateratuning.com/contact. You can also shop at sateratuningstore.com and browse our Mopar parts. Tell us your goal, and we'll build the recipe at the shop in Marengo.

Parts in this build

Parts in this build

Run what we ran

Want this on your car?